Other Colors Available
OCHO Includes PF940C Black Compact Poly 80 Frame
Black Cerakoted Custom 8 Port slide with RMR Cut and RMR Cover Plate Front and Rear Serrations Compatible with Glock® 19
Match Grade Stainless Barrel Compatible with Glock® 19
Upper Parts kit installed
Lower Parts Kit
Guide Rod/Recoil Spring assembly
OEM Sights installed
Upper Fully assembled
Includes Frame Jig and all bits required for completion.
DISCLAIMER:80P Builder DOES NOT SELL FIREARMS.
At 80P Builder, we by no means provide legal advice or legal counsel. Every builder needs to research their respective State laws and Federal laws. We DO NOT provide gunsmithing advice. 80P Builder is not responsible for improper builds, damage or injury due to user error.
April 01, 2019This thing is beautiful to behold! It was a breeze to build accurately...just take your time...I did and it took 45 minutes. Used 2 adjustable clamps and clamped it to the island in the kitchen. Drilled out the holes ( my drill has a level at the top) perfect holes drilled. I used electric tape on the drill bit as a stopper to keep the bit from going past half way through the lower. Flip and repeat. A couple insights for the build. First thing...use an xacto knife with a flat face and a small hammer to tap the “extra material” off. I didn’t want to use a dremmel for that, as it would leave high low spots....and be a mess. It took 5 minutes to get the cleanest possible slide. I used a finger nail file to finish off the smoothing of the frame. Running the file across both sides at the same time kept things symmetrical. The barrel area was easy...use a round sand paper dremmel drum. Before using it, use xacto knife to cut 6 or 7 slices into that area. Leveling the gap it a breeze and clean. I did get a trijicon rmr and it fits great... shoots great, zero issues. I’m going to get a few more...only waiting for threaded barrels as I will have them suppressed. A++ for the kit. Great value! Thank you for building this kit 80p
March 02, 2019Just received it today and wow it took me 20 minutes to complete and I have never built a glock before. This thing is a beauty. It fired first time and everytime all day. I highly recommend this kit. I know I will be back to get another. Thanks 80P for a great kit.
January 26, 2019Ive killed many 80%Ar lowers and this is just cheating. My kit came in FDE and was really easy if you've come from the AR and decide to give one a go. I would suggest using a centering drill bit to get things right. I had a little movement during drilling the frames pin holes but made it work. I cut out thr slides with a razor blade but later finished them up after a trip to get a dremel. My mill is 50 min away. Only thing needing some work was the channel for the spring. I took off only what I thought was needed but a spring doesn't compress evenly and needed some wiggle room. I bought a Leopold RMR but found it wasn't a fit. An email and a quick response later I was told they are milled out for a Trijicon RMR. Edit that if my memory is off. Looks great, took maybe an hour... and I can say yeah I put that one together. Win.
You must log in to leave a review